Cylinder Valve
Where is the idle air control valve in an 98 4 cylinder contour?
4 cyl, 2.0 L, Auto(4), FORD CONTOUR trying to locate it in my engine to see if it is possible to change it myself. ...
Cylinder Valve
Where is the idle air control valve in an 98 4 cylinder contour?
4 cyl, 2.0 L, Auto(4), FORD CONTOUR trying to locate it in my engine to see if it is possible to change it myself. Thanks ahead of time.
Under the back of the intake manifold. You can try to look under the intake with your head in the master cylinder area, you will need a flashlight, and you should be able to see the top bolt that holds it on. If you get under the car, and look up under the intake runners, you can see the bottom bolt. It is a little tight to get to, just about need three elbows.
Compressed gas cylinders have to be handled properly. Otherwise, associated hazards such as fall, fire, explosion or hazardous gas leakage may happen. That's why a safety guide on compressed gas cylinders handling is vitally important.
Here are some safety tips on how to handle gas cylinders safely:
Compressed gas cylinder should be kept in a special room, fenced and locked.
Authorized and trained workers can only have access to the gas cylinders room.
Protect gas cylinder against mechanical damage, by using appropriate racks or other means to hold them securely.
When the gas cylinder is not used, valve caps should always be in place.
To move the gas cylinders manually use sturdy hand trucks, which can hold one or two gas cylinders.
Do not handle gas cylinder with electromagnets, ropes or slings.
Put appropriate label on the cylinders, which describes content and pressure.
Do not allow cylinders to direct sunshine or expose to high temperature (>52degC).
Keep flame away from contact with cylinder surface.
Keep flammable materials away from the cylinders.
Use suitable piping, valves, fittings and others apparatus for the contained gas and pressure.
Make sure we have provided valves, regulators and safety relief devices.
Always open cylinder valve slowly to wide-open position.
Maintain gas cylinder and its accessories in good condition.
Never use defective safety relief device and leaked cylinder. Mark it and separate from the good ones.
Separate and mark empty gas cylinders from the stock.
Do not accept gas cylinders without clear gas name and good gas cylinder condition.
Calculate exactly your compressed gas consumption. It is unsafe to store many compressed gas cylinders for 1 year consumption.
Compressed gas cylinder is a typical source of hazards found in chemical plants. So take it into account when we will do hazard identification task. And the above safety tips are forms of hazard controls.
About the Author
Lukman Nulhakiem is an engineer at a hydrogen peroxide plant with 10 years experiences. He has high concern on chemical plant safety. Learn more about safety related to hot work, visit his blog hot work permit
